Salsa Cutthroat C GRX 810 2x

Frameset

Frame

Cutthroat Carbon

Fork

Cutthroat

Color

Tan

Rear Shock

N/A

Drivetrain

Front Derailleur

Shimano GRX RX810

Rear Derailleur

Shimano GRX RX810

Cassette

Shimano HG700 11–34t, 11-speed

Chain

Shimano HG601

Crankset

Race Face Aeffect-R, Easton 46/30t chainrings

Shifter

Shimano GRX RX810

Brakes and Rotors

Shimano GRX RX810, Shimano RT70 rotors (Center Lock, 160 mm)

Components

Headset

Cane Creek 40

Stem

Salsa Guide

Handlebar

Zoom DR-AL-199BTFOV

Grips/Bar Tape

Anti-Slip Silicone Tape

Seatpost

Salsa Guide

Saddle

WTB SL8 Medium Steel SL

Wheels

Front Wheel

Shimano Deore XT 15 x 110 mm hub, WTB ST i25 rim, 32h

Rear Wheel

Shimano Deore XT 12 x 148 mm hub, WTB ST i25 rim, 32h

Tires

Teravail Sparwood 29 x 2.2", 60 tpi, tubeless compatible, Durable casing

Weight

Complete Bike Weight

24 lb 3 oz (56 cm frame)

Design Wheel x Tire Size

29 x 2.25" (29 x 2.4" Max) (Some front derailleurs may reduce tire clearance. Check manufacturer’s specifications to confirm clearance before installing.)

Susp Fork Length (Travel)

506 mm (100 mm Travel)

Rigid Fork Length

483 mm

Fork Offset

51 mm

Front Spacing

110 x 15 mm Thru-axle

Front Brake (Rotor)

Flat mount (160–180 mm), flat mount frame standard (35 mm thickness), 42 mm bolt length

Front Rack Mounts

Yes, lowrider compatible. Salsa Down Under rack recommended.

Fork Accessory Mounts

Yes, one set of Three-Pack mounts on each fork leg

Headset, Upper

IS41

Headset, Lower

IS52

Seatpost

27.2 mm

Seat Collar

32.0 mm

Dropper Compatible (Routing)

Yes, internal

Front Derailleur Type

Road, braze-on, 2x, bottom-pull

Bottom Bracket

Press Fit BB92, 41 x 92 mm

Crankset (Max & Min Ring)

1x MTN Boost: 40t Max; 2x RD Boost outer ring: 46–50t, inner ring: 30–36t *Oval chainrings subtract 2t from max*

Rear Brake (Rotor)

Flat mount (140–160 mm), flat mount frame standard (25mm Thickness), 32 mm bolt length

Rear Spacing

148 x 12 mm Thru-axle

Rear Axle Size

Ø12 x 174, TP=1.5, TL=20

Derailleur Hanger

QBP #FS2322

Rear Rack Mounts

Yes, Salsa Rack Lock seatpost collar required. Salsa Wanderlust Rack recommended. Salsa Bent Rack Struts (part #RK8030) required for installation on 58 cm and 60 cm frames. Not compatible with Salsa Wanderlust HD Rack

Rear Fender Mounts

n/a

Water Bottle Mounts

Frames up to 54cm: 2 in main triangle. Frames 56cm and larger: 3 in main triangle.

Under Downtube Mount

Yes, two pair.

Top Tube Mounts

Yes, compatible with Salsa Top Tube bag.

Internal Dropper Post Routing

1x mechanical drivetrain: Route the dropper post cable through the drive side of the down tube. Di2 drivetrains: Mount the Di2 battery in the seatpost, then route the dropper post cable through the drive side of the downtube.

External Dropper Post Routing

1x and 2x mechanical and Di2 drivetrains:Route the dropper post cable through the dynamo rear light holes on the non-drive side of the top tube.

Size	52cm	54cm	56cm	58cm	60cm
A. Effective Top Tube	520	540	560	580	600
B. Stand Over	700.44	741.72	810.51	851.75	874.22
C. Reach	357.77	372.91	385.28	395.13	406.36
Crank Arm Length	170	170	175	175	175
D. Stack	584.98	592.45	619.53	644.73	664.34
E. Total Seat Tube Length	355.6	419.1	508	558.8	584.2
F. Headtube Length	90	98	127	154	175
G. Headtube Angle	69	69	69	69	69
H. Seat Tube Angle	74.5	74.25	74.25	74	73.75
Handlebar Width	44cm	46cm	46cm or 48cm	46cm or 50cm	46cm or 52cm
I. BB Drop	70	70	70	70	70
K. Chainstay Length	445	445	445	445	445
L. Fork Length Axle to Crown	483	483	483	483	483
M. Fork Offset	51	51	51	51	51
N. Wheelbase	1049.54	1067.55	1090.31	1109.83	1128.6
Recommended Rider Height	154cm–168cm	168cm–175cm	173cm–185cm	183cm–193cm	190cm–UP
Stem Length	60	70	80	80	90

Measurements based on:

• an 483mm AC x 51mm offset fork which is equivalent to an average 100mm 29" suspension fork at 25% sag 
• a 29" x 2.2" tire measuring 740mm in diameter
• Standover for all sizes is measured vertically to top of toptube from a position 50mm forward of BB center