Salsa Cassidy SLX C

Product description

Cassidy is Salsa’s 165 mm enduro 29er, built for seeking the truly technical trails of the world and taking them head-on. It’s an aggressive descent hunter that shows no fear when the going gets rowdy. Cassidy is resolute when flying down rocky, steep, rutted-out descents and has remarkable climbing prowess. With Split Pivot suspension dialed for maximum traction and pedaling efficiency, Cassidy relishes enduro courses and big terrain.​

• Carbon fiber frame and seatstays with 6061-T6 aluminum chain stays for durability
• Split Pivot + suspension design features 165 mm of efficient travel that’s fully active under braking and supportive throughout its stroke, paired with a 180 mm suspension fork
• A 63.8-degree head tube angle with a short-offset fork provides confidence and handling prowess both up and down the mountain
• Rear Flip chip adjusts the head tube angle and bottom bracket height to accommodate varying terrain, wheel sizes, and personal preference
• 75.7-degree seat tube angle with seat tube lengths optimized for longer dropper posts
• Super Boost 157 x 12mm rear hub spacing allows for shorter chainstays (431–432 mm), more tire clearance, more chainring options, and stiffer wheels

*Specification and pricing subject to change without notice.

Size	SM - 180mm Fork	MD - 180mm Fork	LG - 180mm Fork	XL - 180mm Fork	SM - 170mm Fork	MD - 170mm Fork	LG - 170mm Fork	XL - 170mm Fork
A. Effective Top Tube	596 / 595	619 / 618	642 / 641	665 / 664	595 / 594	617 / 616	641 / 640	664 / 663
B. Stand Over	737 / 740	740 / 743	741 / 744	741 / 744	732 / 734	735 / 738	735 / 738	736 / 739
C. Reach	439/ 443	460 / 463	481 / 484	502 / 505	444/ 447	465 / 468	486 / 489	507 / 510
Crank Arm Length	165	165	170	170	165	165	170	170
D. Stack	617 / 615	622 / 619	631 / 628	640 / 637	614 / 612	618 / 616	627/ 625	636 / 634
E. Total Seat Tube Length	405	430	455	480	405	430	455	480
F. Headtube Length	95	100	110	120	95	100	110	120
G. Headtube Angle	63.8 / 64.1	63.8 / 64.1	63.8 / 64.1	63.8 / 64.1	64.2 / 64.5	64.2 / 64.5	64.2 / 64.5	64.2 / 64.5
H. Seat Tube Angle	75.7 / 76.0	75.7 / 76.0	75.7 / 76.0	75.7 / 76.0	76.1 / 76.4	76.1 / 76.4	76.1 / 76.4	76.1 / 76.4
Handlebar Width	see build kit	see build kit	see build kit	see build kit	see build kit	see build kit	see build kit	see build kit
I. BB Drop	19 / 15	19 / 15	19 / 15	19 / 15	22 / 18	22 / 18	22 / 18	22 / 18
K. Chainstay Length	432 / 431	432 / 431	432 / 431	432 / 431	432 / 431	432 / 431	432 / 431	432 / 431
L. Fork Length Axle to Crown	589	589	589	589	579	579	579	579
M. Fork Offset	43	43	43	43	43	43	43	43
N. Wheelbase	1213 / 1212	1236 / 1235	1262 / 1261	1287 / 1286	1209 / 1208	1232 / 1231	1257 / 1257	1283 / 1282
Recommended Rider Height	165cm–173cm	173cm–180cm	180cm–188cm	188cm–UP	165cm–173cm	173cm–180cm	180cm–188cm	188cm–UP
Stem Length	50	50	50	50	50	50	50	50

Measurements based on:

• an unsprung bike (no sag)
• a 29 x 2.4" tire measuring 746mm in diameter 
• Standover is measured from vertically from ground to top of top tube 50mm forward of bottom bracket, subtract 9mm (0.3") for 27.5 x 2.8” tires
• Note: Where two measurements are listed, the first number is with Flip Chip in Low position; the second number is with Flip Chip in High position